Swiss-Type CNC Lathes
Sliding-headstock lathes for complex, small, precise and slender shaft parts in electronics, automotive, hydraulics, medical, instruments and aerospace.
Why Our Swiss-Type Lathes Hold Accuracy
Spindles run on imported high-precision angular contact bearings, with runout ≤ 2 μm. Beds and slides are one-piece Meehanite cast iron for rigidity and stability.
All axes are servo-driven on imported precision ball screws and guides, with repeatability ≤ 3 μm. The guide-bush and guide-bushless modes can be switched quickly, and radial live tools allow turning, milling and drilling in one cycle. A bar feeder makes continuous unattended production possible.
Single-Spindle Series
| Item | CSL1203II | SL203 | SL263 |
|---|---|---|---|
| Max. bar diameter (mm) | Ø12 | Ø20 | Ø26 |
| Spindle bore (mm) | Ø16 | Ø25 | Ø30 |
| Control | Syntec (standard) | Syntec (standard) | Syntec (standard) |
Full specifications for the single-spindle series: [待补:从资料逐项核对后补全]
SL125 Dual-Spindle Swiss-Type Lathe
| Item | SL125 |
|---|---|
| Max. bar diameter | Ø12 mm |
| Spindle bore | Ø16 mm |
| Max. machining length | 2.5D without guide bush (max. 30 mm); 180 mm with fixed guide bush |
| Main spindle drilling / tapping | Ø7 mm / M6 |
| Sub-spindle max. clamping | Ø12 mm |
| Sub-spindle drilling / tapping | Ø7 mm / M6 |
| Radial live tool drilling / tapping | Ø6 mm / M5 |
| Main spindle speed | 12,000 rpm (rotary guide bush 8,000 rpm) |
| Sub-spindle speed | 12,000 rpm |
| Live tool speed | 6,000 rpm |
| Rapid traverse | 30 m/min (X2, Y1, Z1); 24 m/min (X1, Z2) |
| Spindle runout | ≤ 0.002 mm |
| Repeatability | ≤ 0.003 mm |
| Tooling | 5 OD tools (□10), 4 face tools (ER11), 4 radial live tools (ER11), 4 back tools (ER11) |
| Main / sub-spindle motor | 1.5 kW / 1.5 kW |
| Control | Syntec dual-channel (FANUC or Mitsubishi optional) |
Frequently Asked Questions
Which parts are Swiss-type lathes best for?
Small, precise and slender parts such as pins, shafts, connectors, valve cores, medical screws and instrument parts, usually from bar stock up to Ø26 mm.
Can I run without a guide bush?
Yes. The machines switch between guide-bush and guide-bushless modes, which saves bar remnant on short parts.
Request a Quote
Send the part drawing, material, tolerance and annual volume. We reply with a recommended model, configuration and quotation within one business day.